Відео

That's why there is an opening so you can use 6in extension with 10mm socket

to me thats the same as saying "hey grass grew in the yard...right here in town wow"....

Who's more stupid the guy.that could have got 2 with one shot or would rather get a good video instead 🤔 yep he's stupid enough already

Bro winner winner three turkeys for dinner

They can put a ass- whooping on an adult man

Sometimes I would see a flock of turkeys in the field.🍀

I was hesitant about wacking the top of the screw and thought it would make it more difficult to remove. But after trying every thing else, I figured what the hell. I think I hit it out of anger and frustration and it loosened right up. Thanks for the tips.

Great job !

I have a similar problem whereby my 2008 Sedona's mode knob turns but the air does not change where it comes from. Appears to come from the floor some, and a little from the center console and a little from the defroster. Using this video as a guide plan to go look and see if i can manually move the controls under the dash. If so I will buy an Actuator Mode LH part # 971554D000 and replace. Just wanted to get an idea where this part is located before i go digging into the dash. Thanks alot for posting this simple but very informative, for me, video.

blades are flexing, get some nail clippers and trim the corners and a little bit of the bottom edges of each blade.

MAYBE IT'S BECAUSE SOMEONE IS PUSHING THE SCREEN RIGHT UP INTO THE FAN.... LMAO!

Mine did the same thing. I think they all do that at one point in time

Because its a stupid ass design

You can literally see the bend on the bar holding it on, are you blind?

Cause you fix the rv as soon as you sign the paper!

Take the screen off shim it put it back

Go up at the top and check the crossbar that they are mounted on maybe there's a way to loosen the screws pull up the frame and tighten it back down.

The RV must be hitting middle age, things tend to start sagging around then.

yeah hes right the blades aren't rubbing but the flat base is washers ought to do it

Because the propeller is not far enough up on the shaft to avoid contact. Either move the fan higher by inserting washers between the housing and the mounts, or move the blade higher up the shaft if possible.

When you did the other posts did you just cut them off at grade?

Amazing shot and beautiful big sturgeon. I’d love to see this swim by in clear water in person ❤

nice

Very helpful video thanks a million

It's February 2024 and we sold this house last week and this fence still standing perfectly straight up, no issues.

That was VERY helpful, because the middle was stuck. Thank you!

Thanks for the video. That looks good. If you don't like the looks of the metal pole next to the wooden fence, you can always paint it to match the fence, or paint if black, or place a fence picket in front of the pole. Fencing contractors tell me that if the posts are rotten, the fence itself is too. Do you have any thoughts about that?

Mine doesn’t have Velcro cover. I can’t figure out how to get access.

It's actually 5 quarts of oil.

Thanks so much! This tip fixed the stuck plug so we could actually clean it out. I couldn't seem to hit it hard enough but I showed my bf this video and he got it in a couple minutes with a hammer and a flathead screwdriver.

I have this kind and it is the slowest drain in America. I was shocked when you took that screw part out to see that tiny little hole. No wonder the water will not drain.

I think my Kia is evil and trying to kill me. I got going down the road and the freezing rain hit the windshield and glazed over on the highway. If I hadn't had a windex bottle of deicer I'd be on the side of the road still. If I leave the keys in the ignition, walk away and then remember and go back... it locks (all by itself) just as I reach for the handle.... the thing is evil.

Exactly what I needed. Couldnt find out how to assess a clogged drain on a Koehler toe push drain. This is the only video that addresses this style. Saved me a plumber visit!!! The amount of goop in the drain was unimaginable. works like a charm now. THANK YOU!

This helped me a ton. Thank you

Is there one of those in the rear? I have an 04 and when I turn on rear ac I just hear it turn on but no air comes out

This is THE BEST video that i have seen.... a reg guy with the same issues many of us encounter... i liked the temp post and the galvanized pipe that is off center from the exact location from where the two panels meet. Rather than try to remove my leaning post that is in a LARGE filled hole with concrete, I'll just move my post down a little, I also appreciated the DIY method of adding 2x4's as needed. It is not the perfect method, but i am not looking for perfect. I just need to find a method that will work! THANKS!

Would you know that?

How do I change the oil filter cap housing because it’s leaking from mine

It's called concreat stamping it's done all of the time.

Ya That Works.!!!

"Can learn a lot from the amish" yeah like how to make loterally everything harder than it needs to be. And also how to abuse your kids.

👍Amish people do thing 100% 100% of the time they are Sadat what they do !!

Is it possible to learn this power? --Not from an English.

The sidewalk is amazing ❤❤❤

Solar panels??

Its called stamped concrete❤

That is absolutely spectacular! Hoping everyone stays safe and warm🍁🍂♥️🍂🍁

You can treat your wood with motor oil. Works good

Awesome idea..thanks

This saved me. I had a plug-up at the end and never would have figured out how to remove it. A simple solution to an apparently unworkable problem.